Rag Bolts-manufacture,factory,supplier from China

(Total 24 Products for Rag Bolts)
J bolts is supplied with one full nut and round washer. The material of the bolts is steel, strength grade designation 4.6. Screw threads is parallel throughout their length. After galvanizing, the nut can be easily screwed by hand over the whole threaded length. 
  Contacter maintenant
Rag bolts conforms with BS 1494, except that the bolts shall be 72mm long and they are supplied with M10 thread, coarse pitch, free fit.Each bolt is supplied with one full nut.Features:- Tensile strength: 352 N / mm2- Elongation (break): 33%- Code bending: 180°Measures:- Diameter: 10mm- Length: 72mm- Thickness of tube: 0.6mm- Unit weight: 21gramPackaging:Resistant cardboard box with the customer information in the visible part of the box. TECHNICAL SPECIFICATION: SpecificationLengthQuantity per cartonUnit weight gramWeight per carton(kg)10
  Contacter maintenant
The Bolts, eye bolts, eye nuts and Nuts is manufactured by Hot/Cold forging process neatly and cleanly finished and have metric threads.Eye bolts threads is throughout their length and bolts threads is at 60% of their length.All the materials have bright surface finish. composition:1.The plain washers is cold punched2.Individual nuts and eye nut is used for special purposes, such as lock nuts.3.Before dispatch from the works one washer is fitted to each bolt, eye bolt, eye nut and a nut is screwed on the whole threaded length and left in this position.4.Each set of bolt and nut includes o
  Contacter maintenant
The bolt can be threaded for total length as per customers' requirement.
  Contacter maintenant
Tie rods is supplied with four full nuts. The material of the rods is steel, strength grade designation 4.6 and meet the requirements for mechanical properties.
  Contacter maintenant
Eye bolts is manufactured from steel, strength designation 4.6 and meet the requirements for mechanical properties.The safe working load of any eye bolt is that load which may be safely carried in an axial direction.
  Contacter maintenant
There are many types of products with complete models.Hot-dip galvanized bolts, has strong corrosion resistance.Complying International standard, ensure quality.Model No.: P-7Tension strength: 70KNThe main dimensions of the Parallel hanging clevis meets the requirements of the following figure and table:The meanings of letters and numbers in the models in the table are: number--nominal failure load mark.
  Contacter maintenant
Stainless steel split pins are mostly used to prevent loosening or to lock parts, and are usually used in the tail holes of bolts or studs. The diameters of split pins for bolts of different specifications are also different.
  Contacter maintenant
Galvanized steel cross arm dimensions: 2.5m x 10cm x 10cm x 10mm. Steel Galvanized Bolts and Nuts are equipped. All bolts and nuts made in hot dip galvanized steel and completely threaded.
  Contacter maintenant
Square curved washer with 7/8" diameter hole for 3/4" diameter bolt. Galvanized per ASTM A-153.Features:1. Material: steel2. Finish: galvanized3. Usage: for bolts. Technical specification: 
  Contacter maintenant
Square flat washer with 17.5mm diameter hole for 5/8" diameter bolt. Galvanized per ASTM A-153.Features:1. Material: steel2. Finish: galvanized3. Usage: for 5/8” bolts. Technical specification: 
  Contacter maintenant
The tie strap is used for tying 11kV or 33kV cross-arms to poles. There are steel galvanized bolts and nuts assembled.  All ferrous part is made in hot dip galvanized.
  Contacter maintenant
TJ brass bolts are suitable for connection in power transmission and distribution lines. The red copper material has good electrical conductivity and high resistance to electrical resistance. The bolt design guarantees constant contact pressure; the surface is smooth, without burrs, making the work more stable and calm.
  Contacter maintenant
The turnbuckle bolts are expanded and contracted by the lead screw, which can adjust the tightness of the wire rope. The components can be bundled during component transportation and loosened during installation and correction.1.Types: turnbuckle bolt, open body turnbuckle2.Material: Q235B steel  3.The main purpose:  to adjust the tightness of the wire rope, and it is widely used.4.Features: simple structure, easy processing, low cost, and strong practicability.
  Contacter maintenant
The bi-metal connector is designed to provide an effective corrosion barrier between the dissimilar metals aluminium and copper.The threads nuts and tapped holes is cut after galvanizing and well greased. All other threads is formed before galvanizing. Each PG is tightened  by two bolts with nuts and washers.
  Contacter maintenant
Bimetal PG clamp is used in non-strain tapping or connecting to a line suitable for aluminium and copper conductors.Features:M12 bolts and nuts and washers : mild steelFinish: tin platedMinimum ampere rating: 300ATypeConductor mm²JBTL 16-12016-120JBTL 50-24050-240
  Contacter maintenant
Alloy aluminum anchoring bracket CS10 with neutral messenger on poles(wood, concrete etc), excellent in industrial and saline environment, fixed by 2×(14mm or 16mm) bolts or 2 stainless straps 0.75×20mm . It is made by high strength aluminum alloy by casting. Features:1. Breaking load: 12kN2. Package: 100 pieces3. Gross weight: 19 kg 
  Contacter maintenant
The multipurpose pole clamp is fabricated from structural steel grade 235 and is hot dipped galvanized. The tensile strength of the multipurpose pole clamp is not less than 70KN for the light duty clamps and 120KN for the heavy duty clamps respectively. The clamps is supplied complete with bolts, locking nut, flat washer and spring washer for main or rib line.Cutting and surface1. The cutting is by cold process while bending and shaping is by hot forging. It is capable of being re-flattened without fracture.
  Contacter maintenant
ADSS optical cable suspension clamp components: 1.Aluminum clamp:made of corrosion-resistant aluminum alloy pressure casting, the aluminum alloy has stable chemical properties, good atmospheric corrosion resistance and good mechanical properties. 2.Rubber clamp:Composed of high-quality rubber and center reinforcement, it has the properties of ozone resistance, chemical resistance, weather resistance, high and low temperature performance, high strength and elasticity, and small compression deformation. 3.Bolts, flat washers, spring washers, nuts, closed pins, U-shaped hanging rin
  Contacter maintenant
The NLL wedge-shaped strain clamp has the advantages of very small hysteresis loss, light weight, and convenient installation, which meets the requirements of energy saving and consumption reduction in the transformation of the national grid. The main body of the product is made of aluminum alloy, and the bolts and nuts are made of hot-dip galvanized material.Features:1. Model : wedge type2. Material: high strength alloy aluminum3. Model No.: NLL-24. U bolt number: 2 nos M125. Tension strength: 50kNTechnical specification: Model1KV Overhead Insulated wir
  Contacter maintenant
Stay grips dead ends is the preformed wire type, minimum length is 600mm and finish is galvanized. Thimbles is used with guy grips to support wires through the stay rod eye. A combination of guy grips and pole top make offs is used.Installation image:
  Contacter maintenant
A hoop is a component that uses one material to hug or hoop another material, which is a fastener. There are many types of hoops, cable hoops, telegraph pole hoops, cable hoops, cable hoops, and stainless steel hoops are more commonly used.Technical specification table: 
  Contacter maintenant
The OPGW grounding clamp consists of a section of aluminum alloy wire, an aluminum alloy clamp (connected to the OPGW optical cable), and all-aluminum terminal blocks (connected to the main material of the iron tower).
  Contacter maintenant
Features: 1.The product has been treated with hot-dip galvanizing and has good outdoor anti-corrosion performance. 2.According to the requirements of different optical cables, products that ensure that the optical cable is smaller than the bending radius can be designed. 3.It is convenient to install the pole and tower, the installation is firm, and the optical cable can be well protected to avoid the optical cable from wearing. Purpose: It is used to place the surplus optical cable when the optical cable is connected.
  Contacter maintenant
Relate News
We sent our bolts samples to the National space frame and steel structure quality supervision and inspection center, the samples were tested and meet the technical requirements of standard GB/T 2694-2010 and GB/T 3098.1-2010. 
Mini-Bracket Mini Brackets are used for short and medium spans of ADSS fiber optic cable as well as Aerial Drop cables. Mini Brackets are sized to fit specific ADSS diameters. Standard Mini Brackets are employed with fitted bushings to provide a good support/groove fit and to prevent the support from damaging the cable. The bolted supports are supplied with aluminum captive bolts to simplify installation with no loose parts.
Wonderful anti-pressure ability, accurate brief-circuit current ability ;Match with ordinary floor cord l undertake stainless-steel pipe production generation, the pipe is full of water-blocking off compounds, the application version can efficaciously protect the optical fiber ;Using stainless steel tube production technology, the tube filled with water-blocking compounds, can effectively protect the optical fiber;The utility model has the dual functions of a ground wire and a communication optical cable, and avoids the huge cost of repeated erection and maintenance;It is installed on the top
We finished the HDG angle cross arm and arranged shipment in May of 2019 to our customers from Tanzania. 
After finishing products, before packing, we put our products in very tidy way so that the quantity never be shortage when customers received the items. 
We clean our workshop on time and keep our workers workings in a clean, comfortable and organized place. 
The tension clamp is deployed at a ordinary time. the current within the circuit is deployed from one end of the electricity supply, and the electrical putting gadget is deployed returned to the opposite end of the strength supply to form a closed circuit. if the present day circuit is blocked, the disconnection may arise due to some purpose. the modern-day within the circuit is not smooth, and the circuit does no longer form a closed loop. this is called an open circuit. therefore, all components need to be freed from hysteresis loss.
Characteristics of PET Packing Tape(1) Sturdy tensile energy, not most effective has the tensile power of metal strip, but additionally has the ductility of effect resistance, that may ensure the transportation safety of merchandise. (2) Small elongation, elongation is most effective one-sixth of the polypropylene belt, can hold the anxiety for a long time. (3)Robust temperature resistance, melting point of 260 stages, a hundred and twenty degrees under the use of non-deformation. (4) Top security, no metal rust pollutants of the sure gadgets, vivid shade can be used for referen
Power fittings are accessories made of metal materials that are often used for power output. These accessories are of various types, and the shape and size of each part are different, but they play a very important role. Even very small parts will be indispensable, helping people to output electricity. Some of our common metal rings or metal clips, as well as connecting rings that can be connected to metal pipes, belong to the category of fittings.
The standard plywood crates customized based on requirements of customers and loaded in the container.
Optical cable joint box, ADSS optical cable joint box, OPGW optical cable joint box, OPPC optical cable joint box Uses: Widely used in ADSS, OPGW special optical cable joints and the junction of different optical cables, and play a role in protecting optical cable joints. Features: 1.The metal splice box is made of aluminum alloy casting, which is especially suitable for the protection of optical cable joints under high-voltage electric fields. 2.The metal splice box overcomes the weakness of the plastic splice box, which is poor in anti-aging ability and short life under t
With the continuous growth of China's national economy as a whole and the influence of the reform of telecommunications system, the market demand for ADSS power optical cable has increased significantly, reaching 10 million core kilometers in 2001.In the 21st century, there were several situations at that time: (1) Domestic optical cable enterprises were affected by the "bubble" of optical network, and the telecom market shrank, and the supply exceeded demand.