The stainless steel buckle with Strong load-bearing capacity, tight binding force, no slipping, no tripping, suitable for bundling various types of large-scale, hanging, and vertical heavy objects. Features:-Buckles with rounded edges-With a toothed cavity for better grip of the steel tape-Flat body for fastening to the steel tape-With fins for maximum tension and fixed and secure grip of the steel tape-The buckle is for ¾-inch steel strapping tape.Packaging:The buckles packaging in plastic bags of 100 units and these in turn in cardboard boxes adequately protected against damage or humid
Contacter maintenant
There are many types of cold-rolled steel strips and their applications are also very wide. In order to distinguish various chemical compositions and various purposes of strip steel, and to facilitate selection and use, it is necessary to understand the steel grade.The stainless steel strip is made by further cold rolling.
Contacter maintenant
The stainless steel buckle with tooth-shaped serrations and a certain arc on the back, which Bundle cables and signs can provide the greatest bundling strength. Features:-Buckles with rounded edges-With a toothed cavity for better grip of the steel tape-Flat body for fastening to the steel tape-With fins for maximum tension and fixed and secure grip of the steel tape-The buckle is for ¾-inch steel strapping tape.Packaging:The buckles packaging in plastic bags of 100 units and these in turn in cardboard boxes adequately protected against damage or humidity, with the requested customer info
Contacter maintenant
Steel belt 20X0.7mm with buckle, tts strength and ductility meet requirements for bending the different size of cables on poles. Steel Buckle can hold a single or double wrapped band configuration.Packing:Steel roll of 50 m is packed in form of closed reel rewind tape in nylon plastic roll.
Contacter maintenant
Features: anti-corrosion, anti-oxidation, long service life, high tensile strength, flexible and quick installation, etc. Uses: Traffic signs, advertising signs, cables, surveillance and other different areas. Measures:-Width: 19mm-Thickness: 0.7mm-Length: 50 m.
Contacter maintenant
The second damper can be used for OPGW tension tower vibration dampers if necessary. Tension assembly is used for OPGW cable route's fixing and anchor shackling. Usually be installed on the terminal tower, tight tension tower and intersection angle tower.OPGW tension tower vibration dampers installation image:
Contacter maintenant
The stainless steel strip is made by further cold rolling. Compared with hot-rolled strip, it has higher dimensional accuracy, low surface roughness, good surface quality, smoothness, and higher strength.FEATURES-Tensile strength: 600 N / mm2-Yield strength: 275 N / mm2-Elongation (break): 40%-Temperature: -60°C up to +60°C-Standard: AISI 201Measures:-Width: 19mm-Thickness: 0.7mm-Length: 30 m.
Contacter maintenant
The stay rods is for 40kN LV stays, the diameter of rods is M16, each element/material stay rod, stay base plate, guy grip, top make off, thimble are easy for assembly.A drawing of stay bows complete with thimble:
Contacter maintenant
The stainless steel hoop produced by our company is usually made of C201, 304 material ,with good toughness, fire-proof, waterproof and rust-proof, abrasion resistance, corrosion resistance, and durability.The slitting is complete, polished, trimmed to remove burrs, smooth and not hurting hands, safe and reliable.Features:1. Anti-corrosion, anti-oxidation,2. Long service life, high tensile strength,3. Flexible and quick installation, etc.4. Uses: Traffic signs, advertising signs, cables, surveillance and other different areas. TECHNICAL COMPOSITION (%)CSiMnPSNiCrC
Contacter maintenant
The stay plates are made of Q235B steel, hot dip galvanized surface treatment which used for LV & MV stay rod assembly installation. Both bow type and tubular type we can supply, the tubular type stay rods MV & LV(M16×1830mm; M20×2440mm)exported to most of African countries.Features:1. Material: high strength carbon steel2. Application: for stay rod assembly3. Dimension: 450×450×6mm×22mm hole diameter4. Finish: hot dip galvanized
Contacter maintenant
All Well SS drop round cable clamp made of C201 stainless steel, excellent tensile properties, good resistance to oxidation and corrosive agents, which allows their use in environments where high resistance to corrosion is required, to fix cables, etc.Features: -Reduces installation costs and time -Reduced materials costs-Unique design, better performance -Temperature: -10°C up to +70°C-Min breaking strength: 95% of ADSS U.T.S.Measures:-Cable diameter: 5-7mm round cable-Unit weight: 45 gram-Length: 220mm Installation image:
Contacter maintenant
FTTH fish anchor clamp is fabricated from C201 chrome steel rope and abs frame, appropriate for FTTH optic fiber to the house and overhead line.
Contacter maintenant
FTTH drop cable fisher screw eye is installed on the bracket, used to connect and fix the S fixing piece. The expansion plug is used in conjunction with the ring hook. It is used as an optical fiber access accessory on the cement wall.
Contacter maintenant
The stay rod is called stay set as well, it is a component used to connect the stay wire to the ground anchor.The stay rod are made of Q235B steel, hot dip galvanized surface treatment which used for LV & MV stay rod assembly installation. Both bow type and tubular type we can supply, the tubular type stay rods MV & LV(M16×1830mm; M20×2440mm)exported to most of African countries. Features:1. Material: high strength carbon steel2. Application: for stay rod assembly3. Dimension: M20×2440mm4. Finish: hot dip galvanized
Contacter maintenant
Features: 1. The application force has no concentrated point, the stress is uniform, and it has a good protective effect on the optical cable. 2. Under the premise of not exceeding the lateral compression strength of the optical cable, it has a greater grip on the optical cable and can withstand greater tension.
Contacter maintenant
Stay rod is used for sustaining the mechanical load of the stay wires.The stay bow are made of Q235B steel, hot dip galvanized surface treatment which used for LV & MV stay rod assembly installation. Both bow type and tubular type we can supply, the tubular type stay rods MV & LV(M16×1830mm; M20×2440mm)exported to most of African countries.Features:1. Material: high strength carbon steel2. Application: for stay rod assembly3. Dimension: 16mm4. Finish: hot dip galvanized
Contacter maintenant
The optic fiber fish tension clamp is made of C201 stainless steel rope and ABS body, suitable for FTTH optic fiber to the home and overhead line.
Contacter maintenant
The hook of the parallel cable clamp can be rotated and fixed at ninety degrees. It is used to fix the optical cable wire, fasten it on the steel strand, and connect and fix the S-shaped fixing member on the steel strand. The stranded stay wire is 2.0mm*7 & 2.2mm*7.Dimension : 50×31.5×80mm(L×W×H)Installation image: Drawing:
Contacter maintenant
FTTH drop cable screw eye is a supporting device that is directly screwed to a wooden wall or fixed to a brick-concrete wall with an expansion tube to connect and fix the S fixing member. Cement walls need to be used with expansion plugs.The expansion plug is used in conjunction with the ring hook. It is used as an optical fiber access accessory on the cement wall.
Contacter maintenant
ODWAC, FTTH Self-supporting butterfly-shaped lead-in optical fiber cable installation accessories, stainless steel clamps, optical cable fixing partsThe fiber is squeezed through the sheet and the sheet, and the fiber is squeezed in the middle to complete the wiring function. The main function is to prevent the wire body from bending and protect the wire body, and the locking position can be moved quickly and simply. It is easy to use, put the optical fiber into the slot, install the pull piece, and tighten it.For self-riding butterfly optical cable 2*6mmBreaking load: 1 kNInstallati
Contacter maintenant
Tension set ADSS cables installation requires a special tangent assembly or a mechanical dead end at each pole. Tension clamp helical spiral usually with several numbers of rods, such as 7 of rods and thickness of each rod can be different based on different requirements. 2.5mm is the most often cable sizes. And always be compatible with fitting accessories.Sn Model No.
Contacter maintenant
Direct supply of stainless steel S-type fixing parts, suitable for installation of optical fiber broadband FTTH accessoriesThe fiber is squeezed through the sheet and the sheet, and the fiber is squeezed in the middle to complete the wiring function. The main function is to prevent the wire body from bending and protect the wire body, and the locking position can be moved quickly and simply. It is easy to use, put the optical fiber into the slot, install the pull piece, and tighten it.For self-riding butterfly optical cable 2*5mmDimension: 210×15mmDrawing:Installation image:
Contacter maintenant
Retention Clamp for ADSS cable single extension 50M span cable diameter 9.0-9.5mmTension splint for ADSS tower is made of forged hot dip galvanized steel.use: for installation and maintenance of aerial construction fiber optic networks.Technical Characteristics1. Fitting material: Steel under ASTM A-362. Minimum yield strength: 250Mpa.3. Minimum tensile strength: 400Mpa4. Post fastening method: By 3/4” steel tape.5. Solder points with smooth and uniform finishes6. Hot dip galvanized according to ASTM A 123 Dimensions1. Fitting base dimensions:
Contacter maintenant
Fiber to the home FTTH accessories, S-type fixing cable clamp are composed of stainless steel wire and flame-retardant ABS plastic parts. It is used to bind the self-supporting drop-in optical cable suspension wire and hang the optical cable on the supporting device.The S type cable clamp is used to bind the self-supporting leather cable suspension wire and hang the optical cable on the supporting device, be steadily strengthened and tightened. There are several colors can be chosen: gray, black, white.Instruction: Wrap the 2-5mm optical brazing wire in the cylindrical groove of
Contacter maintenant